8 Best RAM for Ryzen 7 5800X

AMD’s 5000 series processors have proven to be fantastic when it comes to performance in there of gaming and other computationally demanding workloads. This is especially true for the Ryzen 7 5800X. As a result, many are deciding to build or upgrade their PC based on the 5800X CPU. But with AMD Ryzen CPUs being notorious for requiring fast memory, it’s important that you choose the right RAM for your system. Therefore, in this article, we have reviewed the best RAM for Ryzen 7 5800X.

There are a lot of options if you’re after a good, high-performance RAM kit that will work great with your 5800X CPU. But there are a couple of factors you should You’ll want to consider such as the RAM’s frequency and CAS latency. Ideally, a frequency of 3600MHz is the sweet spot in terms of price to performance. However, if you can afford 4000MHz or greater, you should see slightly improved performance at diminishing returns.

As for DDR5 vs DDR4, currently, the performance difference between the two is not significant. This makes the price to performance of DDR5 memory not great when compared to that of DDR4. Therefore, DDR4 is currently the ideal choice. But, DDR5 will eventually become the standard as its price normalize and we start to see increase performance differences between the two.

When you’ve got that covered, then you can go and look at fancy heat spreaders, RGB lights, and additional functionalities. But if you still aren’t sure which kit you should be going for, below we’ll be taking a look at 8 options that work great with AMD’s new CPU, the Ryzen 7 5800X.

1G.Skill Trident Z Neo 16GB, 3600MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 3,600MHz | CAS Latency: 16 | Timings: 16-19-19-39 | Voltage: 1.35V | Height: 43mm/1.69″ | Warranty: Lifetime


  • Rigid built quality with long life
  • Beautiful design with bright RGB lights
  • Heat shredders keep the temps on the down-low


  • Build quality could be better
  • A bit on the expensive side

G.Skill’s Trident Z Neo is one of their best-selling models, and if you decide to get this kit, you’ll easily see why. For a price that a lot of people consider more than reasonable, you’re looking at a 16GB kit that has everything – good frequency, good timings, and (for some people) most important – RGB.

Kicking things off with the performance, the two 8GB sticks work in dual channel and run at 3600MHz. This would be “just okay”, but the timings are 16-19-19-39, which is great for a kit that runs at those frequencies. The heatsink also keeps the sticks rather cool, so you’ll have no problems in terms of temperatures either.

In terms of aesthetics, you’ve got a black and white design that looks great in any build, regardless of colorway. On top are the RGB LED strips, which you can set up to a color of your choice pretty easily by downloading G.Skill’s Trident Z Lighting Control Software. Of course, it would’ve been nice to control it with your motherboard’s software, but this does the job.  

At the end of the day, the Trident Z Neo kit strikes an excellent balance in terms of looks, performance, and price. Unless you’re really picky about one of those things, this is the kit you should be going for.

2Corsair Vengeance RGB Pro 16GB, 3600MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 3,600MHz | CAS Latency: 18 | Timings: 18-22-22-42 | Voltage: 1.35V | Height: 51mm/2″ | Warranty: Lifetime


  • Fast performance and can be overclocked
  • Easy to install and customize
  • Reliable with long life


  • Slightly pricey

Corsair’s at the top of the game when it comes to good RAM kits, and their 16GB Vengeance RGB Pro is a great way to get RAM that looks nice and performs great while keeping the price reasonable. It’s also a great choice for Ryzen 7 5800X, so let’s take a look at whether or not you should be considering it.

To begin with, the kit comes with two 8GB sticks, which means you get dual-channel memory from the start. The frequency is a decent 3600MHz, and you get a CAS latency of 18, which also isn’t bad. Overall, the performance should be pretty good, even when you really need an extra bit of performance. The ICs are carefully screened to ensure you can easily overclock them, to further help out with stability and performance.

Then there is the design, and we have to say we’re huge fans. The all-black heatsink does a great job, functionally, and is still low enough for you to be able to fit most air coolers next to it. However, you also get the RGB lights on top, which enhance the looks. These are 10 individually addressable RGB LEDs, and you can control them with Corsair’s iCUE software, which is neat. A great choice for AMD’s new Ryzen 7 5800X.

3Thermaltake TOUGHRAM RGB 16GB, 4000MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 4,000MHz | CAS Latency: 19 | Timings: 19-23-23-42 | Voltage: 1.35V | Height: 48.2mm/1.89″ | Warranty: Lifetime


  • Bright and Vivid RGB lights
  • Exceptional performance, especially with Ryzen chips
  • XMP 2.0 Enabled


  • Timings could be better but are still fine
  • Pricey

Thermaltake is probably not the first brand that springs to mind when you’re looking at high-performance RAM, but that all changes with their TOUGHRAM RGB kit. This is one of those do-it-all options that not only look stunning but also perform admirably. It does come at a price, though.

First things first, this RAM does look really nice. On the outside, you have a rather thick black and silver heatsink that does an excellent job of keeping the memory cool. But on top, you get an equally thick section of RGB lights. And we’re talking 10 addressable LEDs, so you can customize the RAM lighting to your heart’s content. It also plays nice with Alexa, as well as software from most popular motherboard manufacturers.

Then there’s the performance. This being a 2x8GB kit, you get dual-channel, and the memory runs at 4000MHz, which is the sweet spot for AMD’s 5000 series CPU, including the Ryzen 7 5800X. With a CAS latency of 19, this is pretty impressive, and you’ll have your build running with zero issues. It’s also compatible with XMP 2.0, so overclocking and maintaining stability shouldn’t be a concern either. This is especially true thanks to the high-performance PCB used in the memory.

Overall, this is an excellent premium pick, if you can afford it.

4G.Skill RipJaws V 16GB, 3600MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 3,600MHz | CAS Latency: 18 | Timings: 18-22-22-42 | Voltage: 1.35V | Height: 42mm/1.65″ | Warranty: Lifetime


  • Affordable
  • Reliable and fast with options to overclock
  • Timing and latency is ideal


  • Aesthetic design could be better

Before there was RGB on every possible RAM module out there, G.Skill’s RipJaws V kit was one of the best-selling options out there. And that’s still true today, especially if you’d rather get a subtle RAM kit instead of a flashy one, so let’s take a look at a kit that could be a great pick for the Ryzen 7 5800X.

When it comes to aesthetics, you’re looking at a rather simple design. It’s an all-black heat spreader, but one with a relatively high profile. While this might cause problems when it comes to larger CPU coolers, it actually does a very good job of keeping the memory modules cool, even when they’re under load. And another upside is that it blends in with just about any PC build color.

In terms of performance, this kit runs in dual channel, and at 3600MHz, which should be sufficient for your build. You also get really tight timings, 18-22-22-42, so performance is top-notch at any time. If you’re worried about compatibility, G.Skill has a QVL list that tells you whether or not your motherboard is supported, so you can be sure.

Overall, if you’d like to avoid spending a lot of money, and want to get decent performance out of your RAM kit, this is the one to go for.

5Crucial Ballistix RGB 16GB, 3600MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 3,600MHz | CAS Latency: 16 | Timings: 16-18-18-38 | Voltage: 1.35V | Height: 39.17mm/1.54″ | Warranty: Lifetime


  • Sophisticated heat shredders for effective heat dissipation
  • Fast performance and can peak at above 4000MHz
  • Dim RGB lights, perfect for a minimalistic setup


  • Single rank module
  • RGB control software needs improvement

There’s a reason why Crucial’s Ballistix RGB kit is one of the best-selling RAM kits out there – it just performs very, very well, and all while keeping the price reasonable. If you’re eyeing it as a potential contender for your new Ryzen 7 5800X build, let’s take a closer look at it.

On the outside, you get an all-white heatsink, which not only looks nice but also does a great job at keeping the RAM sticks cool and stable even when pushed hard and overclocked. At the top, you get RGB lights that come with 16 RGB LEDs organized in 8 zones, and you can control them with pretty much any lights software from popular manufacturers. They aren’t that high in terms of profile either, so you shouldn’t have too many problems when it comes to air coolers for your CPU.

The performance is pretty great, too. You have two 8GB sticks to ensure dual channel operation, and they work at 3600MHz. This is sufficient in and of itself, but you also have CL16 timings, as well as XMP 2.0 support for automatic overclocking. This is an excellent choice for an AMD build, especially if you’re doing one that would benefit from a bit of white accent in terms of aesthetics. And did we mention the price is rather reasonable, too?

6Corsair Vengeance LPX 16GB, 3600MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 3,600MHz | CAS Latency: 18 | Timings: 18-22-22-42 | Voltage: 1.35V | Height: 33mm/1.32″ | Warranty: Lifetime


  • Small in size allow easy installation
  • Using branded DIMM chips with lifetime warranty
  • Excellent in-game performance


  • Runs at default 2133MHz upon first boot up

For people who don’t want to unnecessarily spend money on RGB and shiny plastics, but would like to get the best possible performance for the money, Corsair’s Vengeance LPX kit hits the nail on the head. This is a kit that comes with a high-performance PCB and with hand-sorted memory chips to make sure you get plenty of room for overclocking, and stability.

When it comes to looks, there isn’t much to it. You’re looking at an all-black heat spreader with a pretty low profile, so it doesn’t cause any issue with regard to air coolers on your CPU. It does a great job of keeping the RAM sticks cool, though, which is nice. As we mentioned, there is no RGB here – but this does keep the price low.

Let’s discuss performance for a bit. At 3600MHz, this dual-channel kit should do a good job. And at a CAS latency of 18, it does. As we mentioned, Corsair has a rather strict testing process to ensure these modules work at their best at any point in time, so you can rest assured you won’t have any performance issues. Intel’s XMP 2.0 support gives you overclocking opportunities, and you’ll get reliable, fast RAM that won’t get in the way of your massive air cooler.

7XPG D60G 16GB, 3600MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 3,600MHz | CAS Latency: 18 | Timings: 18-20-20 | Voltage: 1.4V | Height: 45.9mm/1.80″ | Warranty: Lifetime


  • Bring and customizable RGB lights for every taste
  • Overclockable abilities, not restricted to BIOS
  • Excellent performance, especially with X570 and X299 chipset motherboards


  • RGB lights may be too much for some

You would be surprised at how many people actually care, quite a bit, about how their build looks like, and RAM makes a huge impact in that regard. If that sounds like you, XPG’s D60G kit is perfect for you.

We’ll start off with the aesthetics because that’s the main thing about the D60G. There are RGB lights that work with most motherboard manufacturers, and they aren’t only on the top, but also extend on the lower half of the RAM sticks, and oh boy do they look nice. This is one of the most stunning kits out there, and even though expensive, is very much worth it.

Performance doesn’t take a back seat, though, because you still get two 8GB sticks running at 3600MHz, and a CAS latency of 18, which is rather neat. The one problem you might have is the heat spreader, which does a great job of keeping the RAM sticks cool, is a bit too tall for some CPU coolers. However, if you’re running liquid cooling, for example, that shouldn’t be an issue.

Overall, you’re looking at one of the most beautiful kits out there, with reasonable performance, too. The only downside is the price – but that’s something you’ll have to deal with if you want that flashy RGB to illuminate the insides of your case.

8Patriot Viper Steel Series 16GB, 4000MHz


Memory Type: DDR4 | Capacity: 16GB (2x8GB) | Speed: 4,000MHz | CAS Latency: 19 | Timings: 19-19-19-39 | Voltage: 1.35V | Height: 44.45mm/1.75″ | Warranty: Lifetime


  • XMP 2.0 Supported
  • Deliver unbeatable performance
  • Long life with limited lifetime warranty


  • Stability problems at higher speeds
  • Not much headroom with OC

A lot of people don’t really care how their RAM looks like, as long as it doesn’t stick out like a sore thumb and it performs well. If that’s the case with you, Patriot’s Viper Steel Series kit should be right up your alley, as it’s one of the best performing RAM kits out there. Yes, it isn’t cheap, but you do get what you pay for.

The design is rather subtle. The sticks are covered with a silver heat spreader, which looks subtle and has nothing but a Viper logo on the top. You’ll also be looking at rather nice thermal performance because the heat spreader does a great job at dissipating heat. Of note is the not-that-high profile, which won’t cause any issues in terms of air cooler compatibility.

When it comes to performance, the Viper Steel Series kit is a great choice. You’ve got two 8GB sticks running in dual channel, and at up to 4000MHz, which is the sweet spot for AMD’s new CPUs. You will need to enable XMP 2.0 for this, though. Worth noting is the CAS latency, too – at CL19, you’re looking at excellent performance overall.

All things considered, yes, it might not be the prettiest RAM kit out there, but it’s certainly one that performs admirably in a variety of situations.

Final words

All things considered, even though you could definitely take advantage of fast, 4000MHz RAM with AMD’s new CPUs, you could still do with something a bit slower (and a lot cheaper). It’s a matter of setting a budget you’re comfortable with, and then getting the kit that works best for you. If you can, by all means, extend that budget and try to get a good kit with low CAS latency, high frequencies, and if you so desire – RGB lights that you can customize.

Tech Edged Free Weekly Tech Deals

Sign up to get the best free weekly Tech Edged approved tech deals.

  • Computing Deals
  • Gaming Deals
  • Curated eBay GPU watch list
  • and more...

By signing up, you agree to our privacy policy and are aged 16 or over.

More Articles Like This